Thread Rating:
  • 6 Vote(s) - 3.83 Average
  • 1
  • 2
  • 3
  • 4
  • 5
JETSEAL109 and Pete's53 OMW!!!!
#1
I will let the pictures do the talking!

Most of you have seen pics of my car before.... I can honestly say that I have NEVER seen it look the way it is right now!

First pics are after only 1 coat of JETSEAL, left on for about 30mins then buffed off.

[Image: SNC00016.jpg]

[Image: SNC00018.jpg]

[Image: SNC00023.jpg]

Then these pics where after 1 coat of Pete's 53 applied over the JETSEAL.
I applied the Pete's by hand, and found that if you stand the car in the sun for about 5 mins just to warm the panels slightly, the application is a hell of a lot easier.

[Image: SNC00024.jpg]

[Image: SNC00025.jpg]

[Image: SNC00026.jpg]

[Image: SNC00027.jpg]

[Image: SNC00028.jpg]

[Image: SNC00029.jpg]

[Image: SNC00030.jpg]

[Image: SNC00031.jpg]

Please note... all these pics where taken with my new phone Wink
freerider AKA don



Reply
#2
Looks like a good combination. As a matter of interest, have you ever used a sealant topped with a wax on your car before?

Some of the reflections are revealing in more ways than one. I spotted Rally Wax and Diamond Guard
Reply
#3
I normally go glaze then wax, never actually tried a sealant on my car.

That stuff on the floor there, has not been used in years, all my real stuff gets kept in the cupboard Wink
freerider AKA don



Reply
#4
Outed!! Rofl
Reply
#5
Very pretty, so um where is mine? Also did the CG guys E-zyme sample arrive?
Reply
#6
Thats 2 layers of Diamond Guard man, why you lie to us all Rofl

Looks wicked Big Grin
David : 083 642 2118
www.mobileimage.co.za

[Image: header2.jpg]



Reply
#7
I'm impressed!! You achieved an excellent reflection on a difficult colour.. Great work!
Shine the tyres..
Post some full pics please...
Reply
#8
I'm going to take full glam pics next weekend after the next coat of Pete's Wink

Calypso: E-zyme should be here with the next shipment.... hopefully being airfreighted by the a-holes that ruined the last order!
freerider AKA don



Reply
#9
Looks great freerider. I told you guys that it was near impossible to beat the look of Jetseal topped with a great wax! The best of both worlds and a phenomenal look!
Reply
#10
JL, how do you think the Jetseal/Petes combo compares to Klasse AIO and SG topped with a top quality wax like P21S?
Reply
#11
A few pics I took yesterday of the reflections of the clouds Wink

[Image: SNC00054.jpg]

[Image: SNC00053.jpg]

[Image: SNC00052.jpg]
freerider AKA don



Reply
#12
Where are pics with two coats of jetseal and pete's?
'84 VW Golf MK II 2.0 16vt GTI (Project)
'99 VW Golf MK IV 2.0 8vt (Boost is done, sound to go in)
'08 Ford Ranger 4.0 V6 Supercab (Daily ox wagon)
'04 BMW 318ti
'01 Mercedes-Benz ML 270 CDI
couple of delivery vans and a truck
Reply
#13
(02-12-2008, 09:58 AM)Graham Savage Wrote: Where are pics with two coats of jetseal and pete's?

I got a bit of jetseal from Lambchop when I was in JHB, and there unfortunately wasnt enough to do 2 coats Icon9

I can only imagine how awesome it will look with 2 coats!!!
freerider AKA don



Reply
#14
See gray ham I told u this stuff was the shizzznit...
Reply
#15
Sweet, ETA?
How much did you need for 1 coat?
'84 VW Golf MK II 2.0 16vt GTI (Project)
'99 VW Golf MK IV 2.0 8vt (Boost is done, sound to go in)
'08 Ford Ranger 4.0 V6 Supercab (Daily ox wagon)
'04 BMW 318ti
'01 Mercedes-Benz ML 270 CDI
couple of delivery vans and a truck
Reply
#16
(02-12-2008, 11:28 AM)Graham Savage Wrote: Sweet, ETA?
How much did you need for 1 coat?

I have all the stuff already, I'm just waiting on the stickers to arrive tomorrow, then everything will be getting packaged and sent out Wink

I got about 30ml of JETSEAL, and I put one coat on my car, my mate put a coat on his Mondeo ST220 and there isnt enough left for another full coat now. So I would safely say you use about 15ml per application.
freerider AKA don



Reply
#17
Fok, I'm so bad with that... I'll do 100ml on my scooter and only cover the tank hehehe - good customer for you :-)

Listen I added bucks to that order for a orange pad when you get
'84 VW Golf MK II 2.0 16vt GTI (Project)
'99 VW Golf MK IV 2.0 8vt (Boost is done, sound to go in)
'08 Ford Ranger 4.0 V6 Supercab (Daily ox wagon)
'04 BMW 318ti
'01 Mercedes-Benz ML 270 CDI
couple of delivery vans and a truck
Reply
#18
Get yourself some distilled water, and prime the applicator pad with about 4 squirts before you start applying product, I find that this prevents excessive product soaking into the dry pad, and also wets the product slightly, making it easier to apply. You will find that as the pad gets primed with product, you can start doing more surface area with less product Wink

I saw that Wink I'll stick a note on your order.
freerider AKA don



Reply
#19
Sweet, first instalment was picked up today... Hmmmmmm that petes smells SO DAMN GOOD!!!
'84 VW Golf MK II 2.0 16vt GTI (Project)
'99 VW Golf MK IV 2.0 8vt (Boost is done, sound to go in)
'08 Ford Ranger 4.0 V6 Supercab (Daily ox wagon)
'04 BMW 318ti
'01 Mercedes-Benz ML 270 CDI
couple of delivery vans and a truck
Reply
#20
(02-12-2008, 08:15 PM)Graham Savage Wrote: Sweet, first instalment was picked up today... Hmmmmmm that petes smells SO DAMN GOOD!!!

Yeah, wait till you warm it up to use it.... that smell just gets 100% better!!!

I'm loving my Pete's Str8pimp
freerider AKA don



Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)