Audi A4 Avant

[AMD001]

Hi Guys

I did a detail on my car in Jan but i was not happy with the results so I decided to do it again with a few more products.

Products Used:

Citrus Wash & Gloss Shampoo
Sonax rim cleaner
Cyclo apc - 10:1
Adams undercarriage spray
3m tape
Smart carpet
Smart dressing
Menz power gloss
Menz P085
Menz p0152
Poorboys world - white diamond
Chemical guys - wet mirror finish
Chemical guys - extreme top coat sealant
Nattys paste wax red
Smartgel
Chemical guys luber
Smartwax Clay
Megs nxt metal polish
blu b gone

Tools & other items Used:

Karcher
Foam lance
2 x chemical guys buckets incl grit guards
4 x normal buckets
Chemical guys drying towel
Chamois
Daytona wheel brush
Gerbil wheel brush
Cotton buds
Mothers fender brush
Megs slide lock brush
2 way detail brush
Interior brush (soft bristle)
Adams applicatior sponges
Pleanty mf cloths
MF applicator pads
6" Hex logic pads: orange / green / white / black & red
6" Lake country pad: black
4" Lake country pads: orange / white / black
Lake country CCS hand applicators : orange / white / red
Mothers washmitt
Chemical guys tyre applicator
Megs G220
Wolfgang finger pockets

Before Pics:

3 weeks of dirt.




The R8 wheels full of brake dust & road grime.


Rubber mats looking sad


Exhaust not that bad


Light colour interior is a pain to look after.A few small stains


The Sonax wheel cleaner & daytona wheel brush did wonders.


Foam Time!!I tried the cwg for the first time.Im really impressed with it.




Then we rinsed & clayed,The contamination was very little but remember
this car got clayed In Jan.


The windows gave the clay hiding!!


Then we rinsed & dried.Btw thats not me,thats my nephew who was helping me out.


We pulled her into the garage & taped up all the important rubbers & emblems.We tried a few combos first,Then we opted for the menz power
gloss with the orange hex logic pad.The power gloss made the paint very dull & removed a few deep imperfections.Then we used the p085 with the green pad,This removed some swirl & brought the colour back to normal.Then we used the p0152 with a white pad,I was impressed with the p0152,This stage removed most of the fine swirl.Then we rinsed the car down.

The white diamond on a black hex logic pad filled some imperfections that were still left & really made the car glow again.Then i followed with the wet mirror finish which really left a wet look.

Then i applied the sealant,Left it for 12 hours,Then applied the nattys paste wax.



The end result



















Paint correction: 60% - If i had a makita i would have achieved 90%

Thanks for looking.

Ahmed